| Weight, kg]: | 0,02 |
| Height 1 [mm]: | 9 |
| Inner diameter 1 [mm]: | 50 |
| Location in the car: | Inside, Internal, Rear axle double-ended, Rear axle, inner |
| Manufacturing material: | Nbr (nitrile butadiene rubber) |
| Outside diameter 1 [mm]: | 70 |
| Part type: | Hub seals |
| Part type: | Hub seals |
| Part type: | Gasket |
| Height 1 [mm]: | 9 |
| Height 2 [mm]: | 15.5 |
| Inner diameter 1 [mm]: | 35 |
| Manufacturing material: | ACM (polyacrylic rubber) |
| Outside diameter 1 [mm]: | 55 |
| Part type: | Gasket |
| Twist type: | Right twist |
| Part type: | Gasket |
| Dust protection: | With dust-proof edge |
| Height 1 [mm]: | 7 |
| Inner diameter 1 [mm]: | 35 |
| Outside diameter 1 [mm]: | 47 |
| Twist type: | Variable torsion |
| Part type: | O-ring seal |
| Type of gaskets: | O-rings |
| Part type: | Gasket |
| Location in the car: | Exhaust Turbocharger |
| Height 1 [mm]: | 9 |
| Inner diameter 1 [mm]: | 35 |
| Manufacturing material: | ACM (polyacrylic rubber) |
| Outside diameter 1 [mm]: | 55 |
| Part type: | Gasket |
| Height 1 [mm]: | 7 |
| Inner diameter 1 [mm]: | 21 |
| Manufacturing material: | FPM (Fluor-Kautschuk) |
| Outside diameter 1 [mm]: | 32 |
| Part type: | O-ring seal |
| Type of gaskets: | O-rings |
| Part type: | Gasket |
| Outside diameter [mm]: | 55 |
| Weight, kg]: | 0.02 |
| Width [mm]: | 10,2 |
| Part type: | O-ring seal |
| Type of gaskets: | O-rings |
| Location in the car: | Rear axle |
| Manufacturing material: | FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk) |
| Outside diameter [mm]: | 73 |
| Part type: | Hub seals |
| Type of gaskets: | O-rings |
| Weight, kg]: | 0.031 |
| Height 1 [mm]: | 8.1 |
| Height 2 [mm]: | 13.9 |
| Inner diameter 1 [mm]: | 35 |
| Location in the car: | Right, output |
| Manufacturing material: | ACM (polyacrylic rubber) |
| Outside diameter 1 [mm]: | 73 |
| Part type: | Gasket |
| Part type: | Gasket |
| Part type: | Gasket |
Pasuję idealnie, fachowo dobrano przez doradców.
Dzień dobry.Wiem że ta uszczelka nie pasuje do mojego samochodu. Ale proszę wysłać średnica zewnętrzna taka jak u mnie a wewnącz na 1mm wieńce specjalnie,bo mam wypracowany wał na skrzyni, będzie lepiej trzymać olej
Białystok • Bielsko-Biała • Bydgoszcz • Bytom • Chorzów • Częstochowa • Dabrowa Górnicza • Elbląg • Gdańsk • Gdynia • Gliwice • Gorzów Wielkopolski • Grudziądz • Inowrocław • Jastrzębie-Zdrój • Jaworzno • Jelenia Góra • Kalisz • Katowice • Kielce • Konin • Koszalin • Kraków • Legnica • Łódź • Lublin • Nowy Sącz • Olsztyn • Opole • Piotrków Trybunalski • Płock • Poznań • Radom • Radomsko • Ruda Śląska • Rybnik • Rzeszów • Siedlce • Słupsk • Sosnowiec • Szczecin • Tarnów • Toruń • Tychy • Wałbrzych • Warsaw • Włocławek • Wrocław • Zabrze • Zielona Góra and others.