| Alternative repair kit: | 498.990, Elring 498.990 |
| Part type: | O-rings for spark plug wells |
| Type of gaskets: | O-rings |
| Inner diameter [mm]: | 17.2 |
| Manufacturing material: | Copper |
| Outside diameter [mm]: | 21 |
| Part type: | Fuel system seals |
| Thickness [mm]: | 2 mm |
| Part type: | O-ring seal |
| Dust protection: | With dust-proof edge |
| Height 1 [mm]: | 7 |
| Inner diameter 1 [mm]: | 50 |
| Outside diameter 1 [mm]: | 62 |
| Colour: | Black |
| Manufacturing material: | Rubber |
| Part type: | O-ring seal |
| The form: | Round, Round |
| Part type: | O-ring seal |
| Type of gaskets: | O-rings |
| Height 1 [mm]: | 6 |
| Height 2 [mm]: | 9.2 |
| Inner diameter 1 [mm]: | 55 |
| Location in the car: | Front axle |
| Manufacturing material: | Nbr (nitrile butadiene rubber) |
| Outside diameter 1 [mm]: | 74 |
| Part type: | Hub seals |
| Height 1 [mm]: | 8 |
| Inner diameter 1 [mm]: | 35 |
| Manufacturing material: | Nbr (nitrile butadiene rubber) |
| Outside diameter 1 [mm]: | 48 |
| Part type: | O-ring seal |
| Type of gaskets: | O-rings |
| Location in the car: | Gearbox side, entrance |
| Part type: | Gasket |
| Weight, kg]: | 0.016 |
| Height 1 [mm]: | 10 |
| Inner diameter 1 [mm]: | 40 |
| Location in the car: | Rear axle |
| Manufacturing material: | Nbr (nitrile butadiene rubber) |
| Outside diameter 1 [mm]: | 65 |
| Part type: | Hub seals |
| Dust protection: | With dust-proof edge |
| Height 1 [mm]: | 7 |
| Inner diameter 1 [mm]: | 30 |
| Location in the car: | Drive Axle |
| Manufacturing material: | ACM (polyacrylic rubber) |
| Outside diameter 1 [mm]: | 40 |
| Part type: | Transmission oil seals |
| Twist type: | Right twist |
| Part type: | Gasket |
| Height 1 [mm]: | 6 |
| Inner diameter 1 [mm]: | 30 |
| Location in the car: | Output |
| Manufacturing material: | ACM (polyacrylic rubber) |
| Outside diameter 1 [mm]: | 45 |
| Part type: | Gasket |
| Inner diameter [mm]: | 81.1 |
| Manufacturing material: | Mvg (silicone rubber) |
| Outside diameter [mm]: | 90.2 |
| Part type: | O-ring seal |
| The form: | A-shape |
| Thickness [mm]: | 4.8 mm |
| Type of gaskets: | O-rings |
| Dust protection: | Without dust-proof edge |
| Height [mm]: | 7 |
| Inner diameter [mm]: | 40 |
| Manufacturing material: | Nbr (nitrile butadiene rubber) |
| Outside diameter [mm]: | 62 |
| Part type: | O-ring seal |
| Shaft seal type: | A |
| Type of gaskets: | O-rings |
| Width [mm]: | 7 |
| Height 1 [mm]: | 9.52 |
| Inner diameter 1 [mm]: | 15.88 |
| Manufacturing material: | Nbr (nitrile butadiene rubber) |
| Outside diameter 1 [mm]: | 28,65, 28.65 |
| Part type: | O-ring seal |
| Type of gaskets: | O-rings |
| Part type: | Hub seals |
| Type of gaskets: | O-rings |
| Part type: | Hub seals |
| Type of gaskets: | O-rings |
| Height 1 [mm]: | 10 |
| Inner diameter 1 [mm]: | 45 |
| Location in the car: | Front axle |
| Manufacturing material: | Nbr (nitrile butadiene rubber) |
| Outside diameter 1 [mm]: | 59,13, 59.13 |
| Part type: | Hub seals |
| Inner diameter [mm]: | 7.5 |
| Manufacturing material: | Copper |
| Outside diameter [mm]: | 15.4 |
| Part type: | Fuel system seals |
| Thickness [mm]: | 2.5 mm |
| Type of gaskets: | O-rings |
Pasuję idealnie, fachowo dobrano przez doradców.
Dzień dobry.Wiem że ta uszczelka nie pasuje do mojego samochodu. Ale proszę wysłać średnica zewnętrzna taka jak u mnie a wewnącz na 1mm wieńce specjalnie,bo mam wypracowany wał na skrzyni, będzie lepiej trzymać olej
Białystok • Bielsko-Biała • Bydgoszcz • Bytom • Chorzów • Częstochowa • Dabrowa Górnicza • Elbląg • Gdańsk • Gdynia • Gliwice • Gorzów Wielkopolski • Grudziądz • Inowrocław • Jastrzębie-Zdrój • Jaworzno • Jelenia Góra • Kalisz • Katowice • Kielce • Konin • Koszalin • Kraków • Legnica • Łódź • Lublin • Nowy Sącz • Olsztyn • Opole • Piotrków Trybunalski • Płock • Poznań • Radom • Radomsko • Ruda Śląska • Rybnik • Rzeszów • Siedlce • Słupsk • Sosnowiec • Szczecin • Tarnów • Toruń • Tychy • Wałbrzych • Warsaw • Włocławek • Wrocław • Zabrze • Zielona Góra and others.