Bolt diameter [mm]: | 16 |
Features of execution 8: | With protective ring |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter 1 [mm]: | 38,3, 38.3 |
Outside diameter 2 [mm]: | 46 |
Rudder type: | For wishbone |
Cone size [mm]: | 19 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Paired article numbers: | G3-120 |
Type of admission: | TÜV/GS tested |
Location: | Front axle, Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside thread [mm]: | M14 x 1,50 rht m |
Type of admission: | TÜV/GS tested |
Cone slope: | 1/8 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Outside diameter 1 [mm]: | 35,2 |
Outside diameter 2 [mm]: | 43,5 |
Required amount: | 2 |
Cone size [mm]: | 16 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside thread [mm]: | M12 x 1,25 rht m |
Type of admission: | TÜV/GS tested |
Cone size [mm]: | 15.9, 15.95 |
Cone slope: | 1/8 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Mounting points diameter [mm]: | 8.5 |
Number of fixing holes: | 3 |
Required amount: | 2 |
Type of admission: | TÜV/GS tested |
Cone size [mm]: | 22 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Rudder type: | For wishbone |
Type of admission: | TÜV/GS tested |
Cone size [mm]: | 16.1 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Outside diameter 1 [mm]: | 45 |
Outside diameter 2 [mm]: | 45,55 |
Outside diameter [mm]: | 55 |
Outside thread [mm]: | M14 x 1,50 rht m |
Required amount: | 2 |
Rudder type: | For wishbone |
Type of admission: | TÜV/GS tested |
Cone size [mm]: | 15 |
Distance between fixing holes [mm]: | 76 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting points diameter [mm]: | 12.2 |
Number of fixing holes: | 2 |
Required amount: | 2 |
Type of admission: | TÜV/GS tested |
Cone size [mm]: | 18.1 |
Distance between fixing holes [mm]: | 80 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting points diameter [mm]: | 13 |
Outside diameter [mm]: | 41.5 |
Required amount: | 2 |
Build type: | Pressed |
Cone size [mm]: | 16 |
Features of execution 8: | With protective ring |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Outside diameter 1 [mm]: | 40,3, 40.3 |
Outside diameter 2 [mm]: | 39,1, 39.1 |
Outside diameter [mm]: | 53.3 |
Outside thread [mm]: | M14 x 1,50 rht m |
Required amount: | 2 |
Rudder type: | For wishbone |
Starting from chassis number: | 970818 |
Cone size [mm]: | 13.4 |
Features of execution 8: | With nut, With protective ring |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Nut-bolt construction: | Self-locking, Self-locking nut |
Outside diameter 1 [mm]: | 33,7, 33.7 |
Outside diameter 2 [mm]: | 41,5, 41.5 |
Outside thread [mm]: | M10 x 1,25 rht m |
Rudder type: | For wishbone |
Type of admission: | TÜV/GS tested |
Cone size [mm]: | 17.84 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting points diameter [mm]: | 10.5 |
Number of fixing holes: | 3 |
Outside thread [mm]: | M16 x 1,50 rht m |
Required amount: | 2 |
Type of admission: | TÜV/GS tested |
Cone size [mm]: | 15.8 |
Cone slope: | 1/8 |
Diameter 1 [mm]: | 16 |
Location: | Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Type of admission: | TÜV/GS tested |
Cone size [mm]: | 15.7, 15.8 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter 1 [mm]: | 46 |
Outside diameter 2 [mm]: | 38,3, 38.4 |
Outside thread [mm]: | M12 x 1,25 rht m |
Required amount: | 2 |
Rudder type: | For wishbone |
Type of admission: | TÜV/GS tested |
Build type: | Pressed |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter [mm]: | 40.3 |
Required amount: | 2 |
Alternative repair kit: | G3-1113 |
Cone size [mm]: | 17.2 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting points diameter [mm]: | 12.8 |
Number of fixing holes: | 3 |
Required amount: | 2 |
Cone size [mm]: | 17.84 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting points diameter [mm]: | 12.8 |
Number of fixing holes: | 3 |
Outside thread [mm]: | M16 x 1,50 rht m |
Required amount: | 2 |
Type of admission: | TÜV/GS tested |
Bolt diameter [mm]: | 16,4 |
Cone size [mm]: | 16.4 |
Length [mm]: | 100.5 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting points diameter [mm]: | 10.5 |
Number of fixing holes: | 3 |
Required amount: | 2 |
Type of admission: | TÜV/GS tested |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Rudder type: | For wishbone |
Type of admission: | TÜV/GS tested |
Białystok • Bielsko-Biała • Bydgoszcz • Bytom • Chorzów • Częstochowa • Dabrowa Górnicza • Elbląg • Gdańsk • Gdynia • Gliwice • Gorzów Wielkopolski • Grudziądz • Inowrocław • Jastrzębie-Zdrój • Jaworzno • Jelenia Góra • Kalisz • Katowice • Kielce • Konin • Koszalin • Kraków • Legnica • Łódź • Lublin • Nowy Sącz • Olsztyn • Opole • Piotrków Trybunalski • Płock • Poznań • Radom • Radomsko • Ruda Śląska • Rybnik • Rzeszów • Siedlce • Słupsk • Sosnowiec • Szczecin • Tarnów • Toruń • Tychy • Wałbrzych • Warsaw • Włocławek • Wrocław • Zabrze • Zielona Góra and others.